XC-Trainer Firmware Update

• BV 3.50 only for XC-Trainer and XC-TrainerDual
• PS 3.50 only for XC-TrainerPro
• EV 3.51 only for XC-Trainer3DG until serial no.7999
• ES 4.51 only for XC-Trainer3DG up serial no.8000

1. Netto Vario acoustics
2. Selection for altitude display between GPS altitude or flight level
3. Speed sensor calibration
4. G-Sensor calibration only for XC-Trainer3DG

XC-Trainer / XC-Trainer_Dual upgrade BV3.35

• Firmware Optimization
• corrected small bug on start time

XC-TrainerPro 

• 20 channel GPS
• 40 hours power
• hight sensitive VARIO
• 145 hours flight storage
• USB for charge/speed/PC

TN Complete VERSION 2.8.0

• NEW: filter for wrong GPS coordinates
• Windows7 issues: Path for Flight, Map and Backup is moved to user document folder
• FIX: KML Filecreation: correct high in data mode 'GPS'
• FIX: IGC Filecreation: 'Laufzeitfehler 5'

XC-Trainer & XC-TrainerDual upgrade BV3.34

• little bug with the USB communication has been eliminated.

E-Prom version 2010

for Top Navigator now available.

XC-Trainer upgrade 3.33

• Warning tone for entering cylinter variable
• New start time entering process

TN Complete VERSION 2.7.0

• support for GPS- and barometric altitudes3
• g-value filenames: can changed without loss of link to corresponding flight
• small optical fixes
• FIX: Program freeze after disconnecting USB cable

XC-Trainer upgrade 3.32

• Glide angle in VARIO, MAP, Thermal and Baro screens
• New menu point for restoring deleted flights
• New Exit from flight mode
• Waypoint list exit in the flight mode
• VARIO calibration

Compititon changes:

• Auto-advancing from start cylinder
• GPS – altitude storing
• Route sequence display in MAP
• Reset all TPT radii
• Check aktiv route before takeoff
• Cylinder radius now to 25km

XC-TrainerEasy

• 20 channel GPS
• High sensitivity VARIO (unique Dual technologie)
• 40 hourse power supply
• 18 hours flight storage
• USB over Speedboard
• Big button, Big display
• Very user friendly software
• High resistant case
• Top price

XC-Trainer upgrade 3.25

• Readout of G‐forces via the TN‐Complete software (only 3DG) 
• Waypoint bearing now in Track Up mode 
• “Distance via marks” summation 
• Sink alarm now disengageable 
• Acoustic climbing signal off before the new flight 
  has been initiated, onset value +0,3m/s 
• Glide ratio (L/D) indicator also without waypoints entered 

TN Complete VERSION 2.6.0

• Support for the new 3DG devices:
  - New data format (TNG) for G-accelerator
  - revieve and store G-accelerator values
  - synchronization and display of G-accelerator with the flights
  - coloring of flight, Baro and GoogleEarth with G-accelerator
• Reworked individual order for the flight windows
• Statistics: Shows duration of flight
• XC-T: Request for take off location after recieve flights
• BUGFIX: delete vaulty MAP (GDI error 3)

XC-Trainer 3DG

NEW >  G-Display and chart recorder (to 9G) over a new screen
NEW >  3 Dimensional G-Recorder  - storage 15 times each secound over 10 hours
NEW >  145 hours flight storage (storage each secound)
NEW >  USB Interface